ASTM D5769-2010 气相色谱法/质谱分析法测定成品汽油中的苯、甲苯以及总芳香物含量的标准试验方法
Test methods to determine benzene and the aromatic content of gasoline are necessary to assess product quality and to meet fuel regulations.
This test method can be used for gasolines that contain oxygenates (alcohols and ethers) as additives. It has been determined that the common oxygenates found in finished gasoline do not interfere with the analysis of benzene and other aromatics by this test method.
1.1 This test method covers the determination of benzene, toluene, other specified individual aromatic compounds, and total aromatics in finished motor gasoline, including gasolines containing oxygenated blending components, by gas chromatography/mass spectrometry (GC/MS).
1.2 This test method has been tested for the following concentration ranges, in liquid volume percent, for the following aromatics: benzene, 0.1 to 4 %; toluene, 1 to 13 %; and total (C6 to C12) aromatics, 10 to 42 %. The round-robin study did not test the method for individual hydrocarbon process streams in a refinery, such as reformates, fluid catalytic cracked naphthas, and so forth, used in the blending of gasolines.
1.3 Results are reported to the nearest 0.01 % for benzene and 0.1 % for the other aromatics by liquid volume.
1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to its use.
ASTM D5769-2010 气相色谱法/质谱分析法测定成品汽油中的苯、甲苯以及总芳香物含量的标准试验方法
2020-07-10 16:51 浏览:202 下载:35
标准类别 | 国外标准 |
---|---|
标准状态 | 现行有效 (标准状态仅供参考) |
颁发部门 | US-ASTM |
发布日期 | 2010 |
实施日期 | |
废止日期 |