检测技术
BS EN 15549-2008 空气质量.环境空气中苯并(a)芘浓度测定用标准方法
2020-05-25 16:43  浏览:283  下载:49
标准类别 国外标准
标准状态 现行有效  (标准状态仅供参考)
颁发部门 GB-BSI
发布日期 2008-04-30
实施日期 2008-04-30
废止日期
  BS EN 15549-2008 空气质量.环境空气中苯并(a)芘浓度测定用标准方法

       This document specifies a measurement method for the determination of particulate benzo[a]pyrene (BaP) in ambient air, which can be used in the framework of the Council Directive 96/62/EC [1] and the Directive 2004/107/EC [2]. This document specifies performance characteristics and performance criteria for the measurement method when it is used as a reference method. The performance characteristics of the measurement method are based on a sampling period of 24 h. This document describes a measurement method which comprises sampling of BaP as part of the PM10 particles, sample extraction and analysis by high performance liquid chromatography (HPLC) with fluorescence detector (FLD) or by gas chromatography with mass spectrometric detection (GC/MS). The method is applicable for the measurement of BaP in the concentration range from approx. 0,04 ng/m3 to approximately 20 ng/m3. The lower limit of the applicable range depends on the noise level of the detector and the variability of the laboratory filter blank. NOTE If the BaP concentration exceeds the calibration range the extract can be diluted.
 
发表评论
0评